Your Source for New or Used Cisco WIC-1T=
Cisco 1600 Series  Cisco 1600 Series WAN Interface Cards (WICs) WIC-1T= 1-Port Serial WAN Interface Card
The Cisco WIC-1T is a single port, synchronous WAN Interface Card (WIC) for
Cisco 1600, 1700, 2600 and 3600 series routers.
The WIC-1T provides serial connections to remote sites or legacy network
devices such as SDLC concentrators. alarm systems, and packet over SONET (POS)
devices.
The WIC-1T features the Cisco 5 in 1 60-pin connector which supports the V.35,
X21 RS-232, RS-449, and RS-530 when used with the appropriate cable.
The WIC-1T can also function in asynchronous mode when used in a 1600 or 1700
series router.
Features:
- One Serial Port
- Uses the same cabling as Cisco 2500 and Cisco 7000.
- Uses the Cisco 60-pin "5-in-1" connector. This connector is DB-60 on end
end and can be V.35, RS-232, RS-449, X.21 or EIE-530 on the other end
depending on your needs.
- Does not support hot swap, however no hardware damage will occur if it
is swapped while the power is on.
- Each serial card has one LED, labeled CONN, which lights when the serial
port is connected. When the port is in data terminal equipment (DTE) mode,
the CONN LED indicates that Data Set Ready (DSR), Data Carrier Detect (DCD),
and Clear To Send (CTS) have been detected. When the port is in data
communications equipment (DCE) mode, it indicates that Data Terminal Ready
(DTR) and Request To Send (RTS) have been detected
Your Cisco WIC-1T= is ready for immediate shipment the same day you place your order in most cases and every product we sell comes with an industry leading One-Year Warranty. Plus, with our ADC Warranty Shield program we can even offer you a Lifetime Warranty. Our relationship doesn't end when the sale is completed. It's just beginning. Free technical support is available toll free by calling (888)872-5619.
|
