Telecom: Wescom SUREPATH T1 Automatic Protection Switch
When the T1 Must Get Through...Take the SUREPATH
|
The T1 APS101 provides cost-effective
self-healing networking in the event of out of frame, excessive bit error rate or loss of
signal for any reason, including cable cuts, equipment failures or signal degradation. |
- Single module for two T1s in, one T1 out
- Line status monitoring
- Individual build-out controls for T1 network
lines
- Temperature hardened
- Mounting versatility, offering easy
integration
- Local and remote switching and manual
override
- Switchable bit error rate thresholds
- AMI or B8ZS line coding
- Automatic detection of
SF/ESF framing
- Automatic detection of AMI or B8ZS line
coding
- Network side repeaterless up to 6000 feet
- Metallic bypass
- Individual switch selectable transceiver
sensitivity
- T1 equalization of equipment line 0-655 feet
and CSU levels (0, -7.5, -15 and -22 dB)
- 5-year limited warranty
|
 |
| The Right Choice for T1
Network Protection |
|
With just one card per end, the SUREPATH T1 APS
continuously analyzes the incoming signal from two redundant Tl lines. Dependent on user
selected criteria, the SUREPATH T1 APS provides the best incoming Tl line to the
equipment.
In the event one of the incoming network
lines exhibits out-of-frame, bit error rate beyond a pre-selected threshold, or loss of
signal for any reason, the SUREPATH T1 APS automatically switches to the clearest
line. The SUREPATH T1 APS ensures a viable Tl signal is passed when one incoming
line is cut, suffers signal degradation or equipment failure.
SUREPATH T1 APS is also your cost
effective choice - our one card-per-end system costs less than the two-per-end the
competition supplies. The SUREPATH T1 APS also offers the industry's highest shelf
density and doesn't require a dedicated shelf. The SUREPATH's distance capability is 3x
better than the competition on the equipment and span sides.
 Charles
360-22 Multiplexer
With the addition of the easily
installed APS kit, the 360-22 now offers total redundancy with dual common cards, dual
power supplies and dual protected T1 facilities. 48 or 24 VDC operation.
| Mechanical |
| Dimensions: |
4.75"l X .69"w X 10"h |
| Weight: |
7 oz. |
Electrical |
| Tl Network Transmit Signal: |
6 volt peak to peak from 0-6000'of cable |
| Tl Equipment Transmit Signal: |
6 volt peak to peak form 0-655'of cable |
| T1 Receive Sensitivity: |
30/36 db of sensitivity |
| Switching: |
Within 10 milliseconds after LOS or OOF
condition for 2 second period. BER switching threshold 10-3 - 10-9 |
| Current Draw: |
65 milliamps @ 49VDC |
| Operating Voltage: |
-42 to 56 VDC |
Environmental |
| Operating temperature: |
-45 to 80° |
| Operating humidity: |
95% (noncondensing) |
Compliance
|
| EMI Requirements: |
Meets UL1950 and FCC Part 15. Meets FCC
Part 15 Class A and Bellcore GR-1089-CORE EMI requirements |
| Tl Signal Requirements: |
Meets Bellcore 62411, ANSI 403 |
| Interface Requirements: |
Meets Bellcore 1089, UL1950 and FCC Part
68 |
Switch to
Savings...Installing Charles SUREPATH T1 APS is your most cost effective strategy for
automatically ensuring T1 network-to-equipment signal reliability.
|
