360-80 Intelligent Channel Bank
Extensive Service Offerings
The 360-80 ICB universal enclosure houses up to 4 channel modules (2 full-size,
2 half-size). Channel module selection includes both voice and data interfaces
and fulfills requirements for FXS/DPO, FXO/DPT, E&M, OCU, DSU, 64XN, ISDN
and Ethernet Networking. The half-size slots accommodate a T1 or E1 controller module and either a
secondary controller card, HSDL Adaptor or one half-size channel module.
Real Estate Savings
The 360-80 has integrated common hardware in a very compact
1.75"x17"x12" profile. This handy box can be wall or rack mounted
by simply rotating the mounting ears. Its small frame takes up only one rack
unit when mounted in a 19" or 23" rack. The unit is temperature
hardened, allowing outdoor applications.
Intelligent Control
Remote monitoring is a snap with the 360-80 ICB. The unit can supply
maintenance information, card specifics and card settings. Remote provisioning
allows card settings to be changed with handy drop-down menus on your PC or
using SNMP. Real
time alarms do not go unnoticed because the alarms displayed on your PC
duplicate the LED alarm, system status and line status information of the ICB.
SNMP management provides trap support for alarm indications.
Time Savings
The T1 controller module is self-configuring, identifying and selecting the
proper SF/ESF and AMI/B8ZS modes of operation consistent with the received
signal. Controller modules come with built-in CSU capabilities and are
pre-configured for quick installation.
Revenue Generating
A need for fractional T1/E1 is not a problem with this streamlined ICB. Groomed
timeslots for fractional T1/E1 allow for split services of voice and data to
multiple locations. 2-way drop and insert capabilities generate additional
revenue opportunities.
High Reliability
The 360-80 ICB is not dependent on a separate power supply. Power is distributed
on the channel modules, eliminating the possibility of a single point of
failure. This also eliminates down time if service or maintenance is required.
1:1 protection of controller modules is also available. All cards are
hot-swappable for uninterruptible service during maintenance.
Powering
Accessories
120/240 VAC to -48VDC Power Supply
The
Power Supply provides a 48 VDC, 2.5 amp output and a convenient wall or desktop mount. The power supply accepts standard
120/240 VAC 50/60 Hz Rack input (operation
from 95 to 250 VAC, 47-63 Hz and provides regulated DC output to the 360-80 ICB.
The case features mounting hardware to attach power supply to 360-80 shelf for a
bank with AC power supply in only 2RU.
An 8-foot, 3-wire power cord plugs into any convenient 120VAC
grounding-type outlet.
Redundant
DC Power Kit
Use
the Charles Industries’ Redundant DC Power Kit to enable multiple power source
connections to the 360-80 ICB
shelf, ensuring maximum protection for critical
applications. The kit contains a Male 10-pin connector with a single pair of red
and black wires and a Female 10-pin connector with two pair of red and black
wires for connection of two power sources.
Application
Note - T1 Channel Banks and Relay Controlled Systems
Ordering
Guide
| ORDER
GUIDE |
DESCRIPTION |
Ordering
Number |
| |
SHELVES |
|
| |
360-80
ICB Universal Enclosure (without UL Kit) 17"x12"x13/4"
Wall or Rack (19" or 23") Mount accommodating both Voice &
Data Interface Cards |
|
93-036080-D |
| |
COMMON
EQUIPMENT |
|
| Choose
One Per System |
3603-81
T1 Controller Module with SNMP, Combined LIU
(Line Interface Unit) and CSU (Channel Service Unit) SNMP-capable- Installation
in Controller slot |
91-360381-B |
| 3603-86 E1 Controller Module with SNMP, Combined
LIU (Line Interface Unit) and CSU (Channel Service Unit) SNMP-capable- Installation
in Controller slot |
91-360386-A |
| Optional
In The 1/2 Slot |
3608-80
Secondary T1 Controller with Cross Over Cable (Installation
in 1/2 Card Slot) |
91-360880-B |
| 3608-80 Secondary E1 Controller with Cross Over Cable (Installation
in 1/2 Card Slot) |
91-360885-A |
| |
FULL
SIZE SERVICE SLOT MODULES |
|
| Choose
Up To 2 Per System |
3652-80
E&M, 12 Ch 2W/4W w/TO, 600/900 ohm, all types of
E/M interfaces |
See Note 4 |
91-365280-B |
| 3657-80
FXS/DPO for T1, 12Ch 2W w/PLARD, ER, LS/GS 600/900 ohm |
|
91-365780-B |
| 3657-85
FXS/DPO for E1, 12Ch 2W w/ER, LS/GS 600/900 ohm |
|
91-365785-A |
| 3658-80
FXO/DPT for T1, 12Ch 2W w/ER, LS/GS, 600/900 ohm DPT
w/wink |
|
91-365880-C |
| 3658-85
FXO/DPT for E1, 12Ch 2W w/ER, LS/GS, 600/900 ohm DPT
w/wink |
|
91-365885-A |
| 3660-80
Manual Ring Down Adaptor, 12Ch |
|
91-366080-A |
| 3641-80
Router, Single Ethernet Port |
|
91-364180-A |
| 3632-80
OCU, 12Ch Subrate Interfaces 2.4 to 19.2, SW56, 56/64
Kb |
See Note 4 |
91-363280-A |
| 3633-80 DSU, 12Ch
Rates 2.4-64Kb, V.35, RS422, RS232, RS530 |
See
Notes 1, 2 & 4 |
91-363380-A |
| 3634-80 56/64xN,
6Ch, Rates 56-1.536, V.35, RS422, RS232, RS530 |
See
Note 1 & 4 |
91-363480-A |
| 3638-80 ISDN, 4Ch
BRI U-Interface 2B+D, B+D, or D |
See
Note 4 |
91-363880-A |
| |
HALF
SIZE SERVICE SLOT MODULES |
|
| Choose
One Per System (Except When Using The 1/2 Slot for Common Equipment) |
3652-81
E&M, 6 Ch 2W/4W w/TO, 600/900 ohm, all types of
E/M interfaces |
See Note 4 |
91-365281-A |
| 3657-81 FXS/DPO for T1, 6Ch
2W w/PLARD, ER, LS/GS 600/900 ohm |
|
91-365781-A |
| 3657-86 FXS/DPO for E1, 6Ch
2W w/ER, LS/GS 600/900 ohm |
|
91-365786-A |
| 3658-81 FXO/DPT for T1, 6Ch
2W w/ER, LS/GS, 600/900 ohm DPT w/wink |
|
91-365881-B |
| 3658-86
FXO/DPT for E1, 6Ch 2W w/ER, LS/GS, 600/900 ohm DPT
w/wink |
|
91-365886-A |
| 3632-81
OCU, 6Ch Subrate Interfaces 2.4 to 19.2, SW56, 56/64
Kb |
See Note 4 |
91-363281-A |
| 3633-81 DSU, 6Ch
Rates 2.4-64Kb, V.35, RS422, RS232, RS530 |
See Note 1, 3
& 4 |
91-363381-A |
| 3634-81 56/64xN, 3Ch,
Rates 56-1.536, V.35, RS422, RS232, RS530 |
See Note 1
& 4 |
91-363481-A |
| 3638-81 ISDN, 2Ch
BRI U-Interface 2B+D, B+D, or D |
See
Note 4 |
91-363881-A |
| |
ACCESSORIES |
|
| Adaptors |
E1
Balun Kit (Balun and Cable) |
97-001811-A |
| HDSL/HDSL2
Adaptor, Accepts 200 mechanics modules |
97-001787-A |
| Digital
Data Cables |
V.35 adapter cable |
03-210149-0 |
| V.24/RS-232/RS-530
adapter cable |
03-210150-0 |
| V.36/RS-449
adapter cable |
03-210151-0 |
| Adapter
Cables |
DSU-DP
4:1 adapter cable |
See
Notes 1 & 2 |
03-210148-0 |
| 2:1 adapter cable for 1/2 size unit |
See Notes 1 & 3 |
03-210152-0 |
| Power
Options |
120/240v
AC to -48V DC power supply (19/23 inch Rack or Wall mount) |
93-855180-A |
| Redundant
D.C. Power Wiring Kit (Power Supplies NOT included) |
|
97-001786-A |
| UL
Kit |
UL kit, 1 set of blank panels to cover open
slots (2 full size, 1half size front and rear) |
97-001793-A |
| Net Mgmt Interfaces |
360-80
ICB Craft Terminal Cable |
|
03-200542-0 |
| *Pricing
subject to change without notice |
| Visual
Slot |
Full Size
Module |
1/2
Size |
|
| Configuration: |
Full Size
Module |
Controller |
|
| Note
1: Digital Data Cables need to be ordered one per
data channel |
| Note
2: The 3633-80 DSU uses one
03-210148-0 cable for every four
data channel to a max of 3 cables |
| Note
3: The 3633-81 DSU uses 2 cables, one
03-210148-0 cable for
4 data channel and/or one
03-210152-0 cable for 2
data channel |
| Note
4: E&M and dataport modules can be used in T1
or E1 Applications |
|
FXS/DPO
